The tp Sherwood Triple Swing Frame (tp808 & tp805) is made from pressure treated pine and galvanised steel. As with all wooden poles, the tp products will have some splits and these will change with the ambient temperature and humidity. The specification from tp Toys allows for individual splits up to 15mm wide and deep on the Swing Beam (horizontal bar) and as the legs have a slightly smaller diameter; up to 12mm wide and deep on these before the strength is impacted.
Before purchasing please read our section 'All about wood' since we cannot replace poles within the manufacturers specification.
It is delivered with pre-drilled holes, ground anchors and swing fixings for three seats. To choose your swing seats please visit our Swing Seats department or follow the links at the bottom of the page.
Remember, if you choose a tp Duo Ride you will need to purchase the tp Duo Ride Bracket (tp774).
The tp Sherwood ranges now use timber sourced from UK forests with FSC certification.
PRODUCT INFORMATION
Accessories: Please see the bottom of this page for related items
Assembly: 2 adults x 2 - 3 hours. Please scroll to the bottom of this page for our local installation service
Dimensions:
3.67m (w) x 2.81m (d) x 2.42m (h)
Swing Beam - 10cms diameter
Swing Legs - 8cms diameter
Instructions: The instructions provided by tp are clear, comprehensive and include your warranty code so please retain them. See our Hints & Tips section for further advice .
Part number: tp808 & tp805
Safety certificates: Tested and approved to EN71 for domestic use only
Safety Perimeter: 2m minimum recommended
Try before you buy: A tp Sherwood Swing Frame is on display at our Display Centre
User weight: Dependant on chosen swing seat, but up to a maximum of 80kgs (12.5 stone) for gentle swinging
Warranty:
Example of a tp Sherwood Triple Swing Frame (tp805 & tp808) (shown here with a Tyre Swing Seat, a tp Junior Swing Seat and a tp Deluxe Swing Seat which are not included in this set)
|
