Ventura Nest Swing Frame
Ventura Play EquipmentVentura Play Equipment
DSC 0215 RDSC 0215 R
Garden Nest SwingGarden Nest Swing
JOT-NESTSEAT2JOT-NESTSEAT2

Ventura Nest Swing Frame

Sorry, this product has been discontinued.

SKU: JOT-VENTURASFN Category:
  • Description
  • Details
  • Delivery

Description

Ventura Nest Swing Frame

High quality square timber Ventura Nest Swing Frame, complete with all fixings you need to create the nest swing frame.  You just need to choose and purchase your Nest Swing Seat, as this is not included in the price.

The price includes all of the following:

  • 4 x Swing Legs
  • 1 x Swing Beam (pre-drilled)
  • 2 x Brace Bars (pre-drilled & countersunk)
  • 2 x Square Swing Frame Corners (green)
  • 16 x M10 Stainless steel coach screws & washers
  • 8 x Bolt Caps (green)
  • 2 x Domestic Nest Swing Hooks (fitted)
  • 2 x Shackles (already attached to some Nest Seats)
  • Instructions

Our Ventura Swing Frame Range

After 10 years as a retailer we finally decided to take our knowledge of timber and play equipment to design and build the ultimate range of domestic wooden swing frames.  Based on super thick timbers and steel corner brackets we can now offer the most stable and durable wooden swing frames on the market. The Single and Nest Swing Frames make great adult swings for the “big kids” in the family. Our focus on quality even extends down to smaller details such as stainless steel fixings, dome bolt caps and pencil edge timber.

We are so confident in the quality that we offer a free sample service.
Simply contact us and we will post a sample of the timber we use in the legs.

All our timber is certified C24 Strength Grade from Certified FSC sources, we do not use low grade timber.  We also do not use thinner timbers for the legs.  All our swing legs and swing beams use the same 95mm x 95mm timber sections.  In addition, we do not use screw thread swing hooks, all our swing hangers use bolts.

Durability

We do not use nails or wood screws, our fixings are heavy duty stainless steel coach screws.  There is no drilling or cutting for you to do, we protect the timber by doing all this for you before treatment.  We do not use surface treatments such as stains or paints.  All our timbers are Class 4 pressure treated for greater penetration (our timber is in the chamber for the longest period and at the highest pressure).

Safety

Also, we do not use finger jointed or plastic coated timber, only single solid sections of European Redwood.  Our metal components have all been tested and approved to the European Toy Safety standard (EN71-1-2-3-8).  Furthermore, to help reduce the chance of splinters, we plane the timber smooth, then sand off the 4 edges to give a rounded finish (‘pencil edge’).

Accessories: Please visit our Swing Seat department to choose a suitable nest swing seat or scroll to the bottom of the page for some options

Assembly:  2 adults x 2 - 3 hours.  Each swing leg needs to be dug approximately 40cms into the ground.  Installation time depends on your ground conditions.  For even greater stability you could set each leg into concrete using a bag of Postmix.  Alternatively if you would like this item assembled, please follow this link for a list of independent outdoor toy installers.

Dimensions: Assembled dimensions – approximately 2.5m (h) x 3.1m (d) x 2.9m (w)

Swing Legs – 95mm x 95mm x 3.2m (l)

Swing Beam – 95mm x 95mm x 2.4m (l)

Swing Corners – oblique 100 degrees corner for added stability with a 60 degrees leg spread

Coach Screws – normally 80mm (l) x M10 (dia) in stainless steel

Brace Bars – 120mm (h) x 50mm (d) x 1.2m (w)

Instructions: Included

Part number: JOT-VENTURASFN

Safety Permineter: 2m minimum front and back is recommended

Safety Standards: Designed for domestic use only. Swing Frame Corners and Swing Hooks tested by TUV Nord and approved to the EN71-1-2-3-8 safety standard

Timber: Our Scandinavian Redwood (also called 'Baltic Pine') timber is planed smooth, with a rounded edge, cut to length then drilled and finally pressure treated with Tanalith-E preservative.  Splits are inevitable with any timber but we try to reduce the number and size by drying all our timber very slowly - using drying racks in a naturally ventilated building - bringing the moisture content down from over 30% to 15% over 6 months

Tools: You will need a Spade, Socket Set, Spirit Level and a Mallet

Warranty: Metalwork - 1 year against failure (surface rust is not included). Timber - 10 years against rot and infestation causing failure (sun bleaching and cracks less than 5mm are normal and not included)

Our warranties cover the original purchaser for normal use in a domestic (private) residence.  All warranties are void if the timber is cut or modified after delivery.  Faulty parts will be replaced by the same or nearest equivalent part at that time.  Our warranties do not refund any groundwork or installation costs.

Weight: The Ventura Swing Frames weighs between approximately 70kgs and 74kgs (depending on moisture content). Swing seats are extra.

Corner Bracket:                                                           Quality fixings:

Ventura-Swing-Fr-CornerVentura-Swing-Fr-brace

Do you deliver to my area?

We deliver to England, Scotland & Wales only.  A delivery surcharge will apply for Highlands & Islands.

How long will I wait?

The Ventura Swing Frames are normally stocked in our own warehouse all year for delivery within 1 week from order confirmation.

How much will it cost?

Standard delivery is free for orders over £150.00

Standard delivery is £4.99 for orders under £150.00

Can I collect from your Thames Valley Display Centre?

Sorry, the Ventura Swing Frames are not available for collection.