Ventura Mini Tower with Monkey Beam
Ventura Mini Tower with Monkey BeamVentura Mini Tower with Monkey Beam
Wooden Climbing FrameWooden Climbing Frame
Climbing Frame with Monkey BarsClimbing Frame with Monkey Bars

Ventura Mini Tower with Monkey Beam

Our own JOT range of wooden climbing frame sets. The Ventura Mini Tower with Monkey Beam is our lowest height Ventura Tower with a platform height of 1.2m and comes complete with ladder, slide, rockwall, rope ladder, Monkey Beam and two swings.

SKU: JOT-VENTURA4xxx Category:
  • Description
  • Details
  • Delivery


Ventura Mini Tower with Monkey Beam

Our Ventura Mini Tower with Monkey Beam is the lowest option from our own Just Outdoor Toys Ventura range of wooden climbing frames.
The Mini Tower has a platform height of 1.2m (4′).

Manufactured in the UK, it is made from high quality, and also pressure treated (against rot and infestation), slow grown Scandinavian or Baltic Redwood making it almost maintenance free.
We are so confident in the quality that we offer a free sample service.
Simply contact us and we will post you samples of the timber we use in both the posts and the planks (e.g. deck, side walls and rockwall).

In addition, with an impressive set of accessories as standard, the Ventura Mini Tower is excellent value for money.
Extra accessories are also available (please see pictures at the bottom of the page).

Some of the picture above show the Ventura Midi Tower range which is taller than the Mini (and has more than 5 stones on the rock wall).

Ventura Mini Tower with Monkey Beam

* normally available in blue, green, red or yellow

There are no metal ground anchors with the Ventura Tower ranges, they are designed to sit on flat, level ground and the two centre posts of the main tower are 25cms longer than required which need to be dug into the ground (on the Monkey Beam and Swing Arm options, the 2 uprights are also dug into the ground the same way).

When comparing climbing frames you should look out for shortcuts which will affect the quality;

  • Fingerjoint timbers – we never use these, therefore, all our wooden parts are made from a single, solid timber
  • Untreated cuts/holes – we complete all our cutting and drilling before sending the timber for treatment
  • Painted timber – we never paint our timbers, we use pressure to force the preservative into our timbers
  • Nails – we never use nails as they can easily work loose, only bolts and screws

Finally, there are other Ventura Tower sets at different heights, including:

Accessories: Please see the bottom of this page for related items

Age guide: The Ventura range of wooden climbing frames are suitable for children between the ages of 3 and 10 years old

Assembly: 2 adults x 1 day.  Alternatively if you would like this item assembled, please follow this link for a list of independent outdoor toy installers.

Mini Tower with Monkey Beam - Footprint: 4.7m (d) x 5.2m (w) (although this depends on configuration)
Monkey Beam: width - 0.56m, length - 2.7m, height - 2.1m, hardwood rungs - 38mm (dia)
Monkey Beam Ground Support Bar - 3m (l) x 15cms (h)
Swing Arm: height - 2.2m (approx), width - 3.2m, depth - 2.8m, top beam - 2.1m (l) x 95mm x 95mm, brace beam - 1.5m (l) x 95mm x 45mm.

See floor plan below.

Deck area: 1.5m (w) x 1.6m (d) external, 1.2m (w) x 1.3m (d) internal
Total height: 3.1m, Eaves height: 2.3m, Platform height: 1.2m, Wall height: 0.7m
Rigging: extends 1.2m from the tower edge
Slide: extends 2.11m from the tower edge
Main timber uprights: 95mm x 95mm
Total weight on delivery: Between approximately 375kgs to 550kgs (the moisture content of the timber can cause a 10% variation in this number)

Instructions: Comprehensive instructions are included.  We also offer an Installation Service.

Part number: JOT-VENTURA4Txxx

Safety certificates: Conforms to EN71.8 and the European Toy Safety Directive for domestic play equipment

Safety perimeter: 2m minimum recommended in all directions

Timber: Our Scandinavian Redwood (also called 'Baltic Pine') timber is planed smooth, with a rounded edge, cut to length then drilled and finally pressure treated with Tanalith-E preservative.  Splits are inevitable with any timber but we try to reduce the number and size by drying all our timber very slowly - using drying racks in a naturally ventilated building - bringing the moisture content down from over 30% to 15% over 6 months

Tools: You will need your own power drill, drill bit set for wood (3.5mm, 6mm, 7mm, 10mm, 22mm and a countersink), hammer, soft-faced mallet, cross-head screwdriver (PZ 2 head), socket set (10mm, 13mm, 17mm, 19mm), spirit level, clamps, spade (narrow head ideally, approx. 15cms), ladder (tall enough to fit roof planks 3.4m high), allen key set (5mm) and a bucket (for soil) 

User weight: 70kgs (12 stone) maximum recommended

Warranty: Timber – 10 years against rot & infestation, Accessories – 1 year

Please note that timber is a natural product that changes with ambient humidity and temperature so timber splits, shakes & cracks are not covered.  Our warranties only apply to the original customer and domestic (family) use.

Fireman's Pole added:


Blackboard Clock added:


Floor plan:


Do you deliver to my area?

We deliver to England, Scotland & Wales only.  A delivery surcharge will apply for Highlands & Islands.

How long will I wait?

The Ventura Mini Tower set is normally stocked in our own warehouse all year for delivery within 1 week from order confirmation.

How much will it cost?

Standard delivery is free for orders over £150.00

Standard delivery if £4.99 for orders under £150.00